19206-XX-30 Hard Iron Impeller for Mission Magnum 4x3x13 Pump


Tobee® Mission 4x3x13 sand pumps and spares are only interchangeable with Mission Magnum pumps and spares.


19206-XX-30 Impeller for Mission Magnum 4x3x13 Centrifugal Pumps.


Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.

Part size cast into the impeller.  This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request

All impellers are investment casted or resin-casted with pickling (acid washing) as our power-end parts, which are also available in cast steel in favor of ductile. All other sizes are resin-casted with pickling (acid washing) to ensure smooth surface finish. To ensure quality, we meticulously check threaded holes by fitting their bolts to ensure the threads are clean and clear. All casings are of course pressure tested and all impellers and dynamic balanced. Each casing is properly pressure tested prior to shipping.

Our impellers are comparable to famous pump brands such as NOV Mission Magnum® and MCM.




Item Pump Size Material Part Number
1 3x2x13 Hard Iron 19204-XX-30
2 3x2x13 Magnachrome 19204-XX-AZ
3 3x2x13 Ductile Hard Iron H19204-XX-04
4 3x2x13 Alum Bronze 19204-XX-13
5 4x3x13 Hard Iron 19206-XX-30
6 4x3x13 Magnachrome 19206-XX-AZ
7 4x3x13 Ductile Hard Iron H19206-XX-30
8 4x3x13 Alum Bronze 19206-XX-13
9 5x4x14 Hard Iron 19224-XX-30
10 5x4x14 Ductile Hard Iron H2523-XX-30
11 6x5x11 Hard Iron 19121-XX-30
12 6x5x11 Magnachrome 19121-XX-AZ
13 6x5x11 Ductile Hard Iron H2524-XX-30
14 6x5x14 Hard Iron 19121-XX-30
15 6x5x14 Magnachrome 19121-XX-AZ
16 6x5x14 Ductile Hard Iron H2524-XX-30
17 8x6x11 Hard Iron 19121-XX-30
18 8x6x11 Ductile Hard Iron H2524-XX-30
19 8x6x14 Hard Iron 19116-XX-30
20 8x6x14 Magnachrome 19116-XX-AZ
21 8x6x14 Ductile Hard Iron H2525-A0-30
22 10x8x14 Hard Iron 21867-XX-30
23 10x8x14 Ductile Hard Iron H2526-XX-30


Tobee® offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.

19206-XX-30 Impeller for Mission Magnum 4x3x13 Centrifugal Pumps


There are no reviews yet.

Be the first to review “19206-XX-30 Hard Iron Impeller for Mission Magnum 4x3x13 Pump”

Your email address will not be published. Required fields are marked *