5×4-14 Single-stage Centrifugal Pump for Mud Cooling Towers



• Model: 5×4-14
• Capacity: 80-120 m3/h
• Head: 24-28 m
• Impeller Diameter: 11-14 inch
• Motor: 18.5/22/30 kW
• Motor speed: 1450/1750rpm
• Materials: Hard iron, Cast iron, SS, High chrome, Bronze.

200 in stock


Sandman™ Mission Magnum I 5×4-14 Centrifugal Pump with ATEX Ex-proof electric motor and Ex-proof control panel, the pump can be used as mud tank pump, transfer sand pump, etc.

Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.

• Sizes from 3x2x13 to 10x8x14
• Flow rates from a few gallons per minute up to 2,600 GPM
• Head pressure up to 550 feet
• Best utilized for applications requiring up to 200 HP

Design Features:

• Up to 50% more capacity from the 8 x 6 pump
• Optimum pressure at low operating speeds
• Thicker casing to extend life from wear and corrosion
• New impeller design to reduce loads and extend bearing life
• Larger, stronger shaft to reduce deflection
• Replaceable shaft sleeve in packing wear area
• Larger, long-life bearings
• Replaceable stuffing box cover
• Smoother, non-turbulent flow throughout casing

Mission Magnum Centrifugal Pump Applications:

• Mud pumping – offshore/onshore
• Solids control
• Dredging
• Leveling or Rig Platform (ballast)
• Barite, ferric oxide, and mineral oil
• Base drilling muds
• Glass fibers
• Sugar processing
• Ash or coal conveyers
• Cement

Additional information

Weight 230 kg


There are no reviews yet.

Be the first to review “5×4-14 Single-stage Centrifugal Pump for Mud Cooling Towers”

Your email address will not be published. Required fields are marked *