China Mission Magnum I 8x6x14 Fluid Pump



• Model: 8x6x14
• Capacity: 240-260 m3/h
• Head: 28-33 m
• Impeller diameter: 9-14 inch
• Recommend Power: 55/75 kW
• Materials: Hard iron, Cast iron, SS.


Sandman™ produce Mission Magnum I 8x6x14 with 75kW electric motor used as fluid pumps and transfer pumps, the impeller diameter can be adjusted as the pump head changes.

Sandman™ Mission Magnum I Pumps

Tobee® as a professional centrifugal pump manufacturer in China, with more than 36 years of experience in the manufacturing and service of Mission centrifugal pumps and parts. Our pumps are specifically designed to meet the needs of some of the oil and gas drilling, mining, fluid pumping, horizontal directional drilling and well stimulation fracking.

Tobee offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.

According to the different working conditions, Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, etc

Design Features

• Versatile stuffing box
• One piece casing
• Casing gasket receded for protection
• Back vanes reduce collection of solids at stuffing box
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Lip seals for maximum bearing protection (Labyrinth seals optional)
• Duplex angular contact bearings
• Thicker, stronger concentric casings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Single row roller bearings for increased bearing life
• Easy accessible front access drain
• Reduced high bearing loads

Mission Magnum 8x6x14 Pump Performance Parameters:

Model Impeller














8x6x14 14’’ 1450 260 28-33 65 4.5 75
13’’ 1450 250 28-33 65 4.5 75
12 1/2’’ 1450 240 28-33 65 4.5 55
12’’ 1450 240 28-33 65 4.3 55
11’’ 1450 220 28-33 65 4.0 55
12’’ 1750 240 28-33 65 4.3 75
11’’ 1750 220 28-33 65 4.0 75

Additional information

Weight 280 kg


There are no reviews yet.

Be the first to review “China Mission Magnum I 8x6x14 Fluid Pump”

Your email address will not be published. Required fields are marked *