21867-XX-30 Impeller for Mission Magnum I 10x8x14 C-Pump

Description

Sandman™ Mission Magnum I centrifugal pump 10x8x14 spare parts Impeller 21867-xx-30 (641221007), and the impeller can be cut according to your pump requirement.

Sandman™ provides 21867-xx-30 impellers for Mission Magnum I centrifugal pump 10x8x14:
21867-50-30 Impeller 10 x 8 – 9 inch
21867-54-30 Impeller 10 x 8 – 9.5 inch
21867-60-30 Impeller 10 x 8 – 10 inch
21867-64-30 Impeller 10 x 8 – 10.5 inch
21867-70-30 Impeller 10 x 8 – 11 inch
21867-74-30 Impeller 10 x 8 – 11.5 inch
21867-80-30 Impeller 10 x 8 – 12 inch
21867-84-30 Impeller 10 x 8 – 12.5 inch
21867-90-30 Impeller 10 x 8 – 13 inch
21867-94-30 Impeller 10 x 8 – 13.5 inch
21867-A0-30 Impeller 10 x 8 – 14 inch

Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.

Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request

All impellers are investment casted or resin-casted with pickling (acid washing) as our power-end parts, which are also available in cast steel in favor of ductile. All other sizes are resin-casted with pickling (acid washing) to ensure smooth surface finish. To ensure quality, we meticulously check threaded holes by fitting their bolts to ensure the threads are clean and clear. All casings are of course pressure tested and all impellers and dynamic balanced. Each casing is properly pressure tested prior to shipping.