Sandman™ H2501-01-30A, 2501-37AH Wear Pad with ductile hard iron, it’s used for Mission 2500 Supreme 4x3x13 Centrifugal Pump Casing.
The casings are offered with wear pads on every size, except the 3x2x13 inch centrifugal pump. The wear pads can be easily changed by ordering replacement wear pad repair kits, which come with a wear pad, studs, nuts, and a gasket.
FLUID END COMPONENTS
Forum offers the impellers, stuffing box covers, and wear pads on the centrifugal pump in hard iron, for increased wear life. On the 3 x 2 x 13 size for the 2-1/2 centrifugal pump, which does not have a wear pad, even the casing is cast out of hard iron. The same holds true for all fluid end wear components on the 1-7/8 and the 1-1/8 pumps.
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
1. XX-Impeller code-First X equals dia.of impeller in inches minus 4.Therefore 10″=6,9″=5, etc…14″use letter A;
2. Second X equals fractional data in 1/8’s.Therefore 1/8″=1, 1/4″=2 ,etc…Thus a 10.5″ impeller is coded as 64, 12″ impeller is coded as 80, 13.25″ impeller is coded as 92 etc…
3. YYY – the metric diameter of impeller, therefore 12″ is coded as 305mm, 11″ is coded as 280mm.
Reviews
There are no reviews yet.
Be the first to review “H2501-01-30A Wear Pad for Mission 2500 Supreme 4x3x13 Pump Casing”Cancel Reply
Reviews
There are no reviews yet.